Caution: Danger of scalding Only open sealing cover on expansion tank when engine has cooled down. Drain coolant, refer to Cooling System – Service and Repair – Procedures See: Service and Repair Remove fan cowl, refer to Fan Shroud – Service and Repair – Procedures See: Fan Shroud/Service and Repair Note: When removing the fan cowl, note the engine variant. Air conditioner Disconnect plug connection on temperature switch. Disconnect upper water hose. Disconnect lower water hose. Disconnect expansion hose.
Automatic transmission Remove transmission oil cooler lines, catch transmission oil as it escapes and dispose of correctly. Installation: Check transmission oil level and correct if necessary, refer to Transmission and Drivetrain. Check connection for leaks. Unfasten left and right radiator mounts by pressing detent down with screwdriver. Sectional view of radiator mount: 1. Screwdriver 2. Front trim 3. Retaining lug for radiator Installation: Attach retaining lugs in left and right sides of radiator and press down firmly. The detent must engage audibly several times. Installation: Use screwdriver to locate and lug of radiator mount and to tighten the unit. Lift radiator upwards (together with intercooler if applicable). Installation: Place radiator on supports. Installation: Note rubber mounts on left and right sides.Related Entry : bmw z3 radiator removal, google radiator removal 2005 crown vic, how to replace a radiator on 2000 bmw z 3, how to replace the cowling on a 2000 crv, installing lower hose 2000 taurus, removing Z3 radiator, transmission pan removal 2000 chevy silverado,