Issue some vehicles may exhibit a no crank condition due to an open circuit in the starter relay to starter motor circuit at the starter motor connection. Action follow the service procedure steps to correct the condition. Service procedure a new starter terminal wiring pigtail kit is released eliminating the need to replace the entire harness for the terminal connection. Note terminal kit only services the starter relay to starter motor circuit. The kit does not service starter motor battery power circuit.
Refer to instruction sheet contained in wiring pigtail kit for wiring harness service procedure. Note reference the appropriate workshop manual service section 303-06 for removal and installation of the starter motor wiring terminal connection procedures.Related Entry : 2010 crown vic no crank,