2004 Ford F150 Rear Axle Differential Cover, Axle Shaft, Oil Seal, and Rear Wheel Bearing Removal And Installation

download 1. With the vehicle in NEUTRAL, position on a hoist. For additional information, refer to Section 100-00. 2. Remove the rear wheel and tire assembly. For additional information, refer to Section 204-00. 3. Remove the parts in the order indicated in the following illustration and table. 4. To install, reverse the removal procedure. 5. …

Continue reading ‘2004 Ford F150 Rear Axle Differential Cover, Axle Shaft, Oil Seal, and Rear Wheel Bearing Removal And Installation’ »

1994 Nissan Maxima SE FWD Axle Shaft Removal, Disassembly, Reassembly & Installation

download FWD AXLE SHAFT NOTE: On A/T models, right axle shaft must be removed to remove left axle shaft. On all models, cover axle shaft boots with shop towel to prevent damaging boots. Always use NEW snap rings, circular clips and boot clamps during reassembly and installation. Replace axle shaft oil seal in differential before …

Continue reading ‘1994 Nissan Maxima SE FWD Axle Shaft Removal, Disassembly, Reassembly & Installation’ »

1997 Ford F-250/ 350/ Super Duty Axle Shaft, Hub, Oil Seal and Outer Wheel Bearing Removal And Installation

download Removal NOTE: If, for any reason, the rear hub (1109) is removed from the spindle, the old hub seal must be removed and a new hub seal installed. 1. Set the parking brake and loosen the eight axle shaft retaining bolts. 2. Raise the vehicle to the desired working height, keeping the axle parallel …

Continue reading ‘1997 Ford F-250/ 350/ Super Duty Axle Shaft, Hub, Oil Seal and Outer Wheel Bearing Removal And Installation’ »

2000 Ford F 150 Axle Shaft Removal Installation

download WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in unexpected inflation or deflation of the …

Continue reading ‘2000 Ford F 150 Axle Shaft Removal Installation’ »

1994 Ford Explorer How to Remove Front Wheel Bearings

download Dana 35-IFS & Automatic Locking Hubs 1. Raise and support vehicle. Remove front wheel assemblies. Remove retaining washers from wheel lug nut studs. See Fig. 1 . 2. Remove automatic locking hub assemblies. Remove snap ring and axle shaft spacer. Carefully pull plastic cam assembly from bearing adjusting nut. Remove 2 plastic thrust washers …

Continue reading ‘1994 Ford Explorer How to Remove Front Wheel Bearings’ »