2000 Mercedes Benz ML 55 AMG Alignment Specs

download Vehicle Alignment Vehicle Level Front Axle Except ML55 AMG ML55 AMG (163.174) Rear Axle Except ML55 AMG ML55 AMG (163.174) NOTE: To measure vehicle level use (86) Electronic inclination measuring instrument (CM 9606) 6.4°±0.7° 4.0°±0.7° 4.7°±1.0° 2.9°±1.2° Procedure: Measure ride heights of front and rear axles and consult chart for front axle caster angle …

Continue reading ‘2000 Mercedes Benz ML 55 AMG Alignment Specs’ »

1999 Chevrolet Blazer Camber & Caster Adjustment

download “C”, “G” & “K” Series Except 1999 Sierra & Silverado C1500 & C2500 (Caster Adjustment) 1. Check frame angle. See “C”, “G”, “K” & “P” (FRAME ANGLE) . If corrected caster is not within specification, remove frame bracket slots. See “C”, “G” & “K” SERIES (FRAME BRACKET SLOT REMOVAL) . Reset caster by loosening …

Continue reading ‘1999 Chevrolet Blazer Camber & Caster Adjustment’ »

1999 Hyundai Tiburon Timing Belt Replacement

download CAUTION: This application is an interference engine. Do not rotate camshaft or crankshaft when timing belt is removed, or engine damage may occur. TIMING BELT NOTE: On some models, engine is equipped with a timing belt and timing chain. Inspect timing chain when replacing timing belt. Removal 1. Remove all drive belts and drive …

Continue reading ‘1999 Hyundai Tiburon Timing Belt Replacement’ »

2003 Ford Explorer Sport Trac Alignment – Irregular Front Tire Wear

download Irregular tire wear ford: 2003-2005 explorer sport trac issue some 2003-2005 explorer sport trac vehicles equipped with the goodyear wrangler rt/s, p255/70r16 109s at owl tire, may exhibit signs of feathering heel-toe wear on the inside or outside edges of the front tires. Tire noise may also be present during regular highway drive or …

Continue reading ‘2003 Ford Explorer Sport Trac Alignment – Irregular Front Tire Wear’ »

2004 Ford Excursion, F-Super Duty 250-550 Suspension System Camber and Caster Adjustment

download 1. CAUTION: Do not bend axles or radius arms to change alignment. Using an alignment rack and manufacturer’s instructions, measure the caster and camber. • Refer to Alignment Specifications in the Specifications portion of this section for optimal alignment settings. • Note any difference between the actual measurements and the specification. This information will …

Continue reading ‘2004 Ford Excursion, F-Super Duty 250-550 Suspension System Camber and Caster Adjustment’ »