1996 Ford Taurus Camshaft Position (CMP) sensor removal installation

download CAUTION: Syncro Positioning Tool T95T-12200-A (303-529) must be obtained prior to installation of the replacement synchronizer assembly. Failure to follow this procedure will result in the fuel system being out of time with the engine, possibly causing engine damage. REMOVAL CAUTION: Prior to removal of the Camshaft Position (CMP) sensor, set cylinder No.1 to …

Continue reading ‘1996 Ford Taurus Camshaft Position (CMP) sensor removal installation’ »

2003 Ford Taurus/ Sable, Camshaft Position (CMP) Sensor — 3.0L (2V) Removal And Installation

download Removal and Installation 1. Disconnect the battery ground cable. For additional information, refer to Section 414-01. 2. Remove the accelerator cable snow shield. 3. Detach the spark plug wire retainer. 4. Detach the wiring harness from the intake manifold support. 5. NOTE: The upper intake manifold is removed for clarity. Release the fuel charging …

Continue reading ‘2003 Ford Taurus/ Sable, Camshaft Position (CMP) Sensor — 3.0L (2V) Removal And Installation’ »

2003-2005 Ford Thunderbird Wrench Light On With Both Dtc P2106 And P2135

download Ford: lincoln: mercury: this article supersedes tsb 05-09-15 to update the issue and dealer coding. Issue: some vehicles built 11/29/2004 and prior may exhibit the wrench light on with both p2106 and p2135 diagnostic trouble codes (dtcs). Action: replace the throttle position sensor (tps) following the instruction sheet included in the tps service kit. …

Continue reading ‘2003-2005 Ford Thunderbird Wrench Light On With Both Dtc P2106 And P2135’ »

2001-2005 Ford Taurus Camshaft Tick Noise—3.0L 4V Engine Only

download Issue some 2001-2005 taurus/sable, 2001-2006 escape and 2005-2006 mariner vehicles built prior to 1-17-2006 equipped with the 3.0l 4v duratec engine may exhibit a ticking noise from the left bank cylinder head, with the engine at normal operating temperature only. Action to diagnose, with the engine running and warm (normal operation temperature), using a …

Continue reading ‘2001-2005 Ford Taurus Camshaft Tick Noise—3.0L 4V Engine Only’ »

2003 Ford Taurus/ Sable How To Remove and Install Camshaft Synchronizer

download Removal 1. CAUTION: The No. 1 cylinder must be set on top dead center (TDC) of the compression stroke or the synchronizer assembly will not be installed correctly. CAUTION: Do not turn the crankshaft or the camshaft during the removal and installation procedure or the fuel system timing will be out of time with …

Continue reading ‘2003 Ford Taurus/ Sable How To Remove and Install Camshaft Synchronizer’ »