1997 Nissan Pathfinder SE Timing Belt Replacement

download Removal (Frontier, Pathfinder, QX4 & Xterra) 1. Disconnect negative battery cable. Remove the engine undercover. Drain coolant and remove the radiator. Remove engine cooling fan and water pump pulley. Remove accessory drive belts. Remove spark plugs. 2. Remove distributor protector. Remove A/C compressor drive belt idler bracket. Remove fresh air intake tube from rocker …

Continue reading ‘1997 Nissan Pathfinder SE Timing Belt Replacement’ »

2001–2004 Nissan Pathfinder Driver’s Seat (With Adp Only) Won’t Move Forward Or Backward

download Applied vehicles: if you confirm: the driver’s seat will not move in the forward or backward direction, 2001 – 2004 pathfinder (r50) equipped with adp only actions: 1. Confirm this bulletin applies (see steps 1 and 2 of the service procedure). 2. If needed, install the seat slide motor kit (see parts information). Important: …

Continue reading ‘2001–2004 Nissan Pathfinder Driver’s Seat (With Adp Only) Won’t Move Forward Or Backward’ »

Nissan Camshaft / Crankshaft Position Sensor Identification Information

download • The Crankshaft Position Sensor is located at the lower front of the transmission. Crankshaft Position Sensor Figure 2 • The Camshaft Position Sensor is located at the front of the driver side cylinder head (Bank 1). See NOTE See NOTE Camshaft Position Sensor Figure 3 NOTE: 2007 to 2009 Applied Vehicles are equipped …

Continue reading ‘Nissan Camshaft / Crankshaft Position Sensor Identification Information’ »

1989-1995 Nissan Pick-ups and Pathfinder Heater Core Removal & Installation

download REMOVAL & INSTALLATION See Figures 1 through 5 Nissan offers no factory approved information regarding service to the heating and air conditioning systems. Please utilize this procedures as a general guide, referring to the accompanying figures, as necessary for further clarification. 1. Remove the heater assembly. 2. Remove the screws and clips and separate …

Continue reading ‘1989-1995 Nissan Pick-ups and Pathfinder Heater Core Removal & Installation’ »

1996 Nissan Altima GLE Timing Chain Replacement

download CAUTION: If cylinder head is installed and timing chain is disconnected, DO NOT rotate camshaft or crankshaft; valves will contact pistons, resulting in bent valves. NOTE: Procedure includes cylinder head removal; however, it may not be necessary to remove cylinder head. Removal 1. Release fuel pressure. See FUEL PRESSURE RELEASE . Drain coolant from …

Continue reading ‘1996 Nissan Altima GLE Timing Chain Replacement’ »