2001 Mazda Protege ES Variable Tumble Control System (Vtcs) Solenoid Valve Inspection

download Simulation Test 1. Carry out the “VTCS Operation Inspection”. If not as specified, perform the further inspection for the VTCS solenoid valve. Airflow Inspection NOTE: Perform the following test only as directed. 1. Remove the VTCS solenoid valve. 2. Inspect for the air flow inspection each port under the following condition. If as specified, …

Continue reading ‘2001 Mazda Protege ES Variable Tumble Control System (Vtcs) Solenoid Valve Inspection’ »

2001 Mazda Millenia S Disabling & Activating Air Bag System

download WARNING: After disabling air bag system, wait more than one minute before servicing. The air bag system voltage is maintained for one minute after system is disabled. Failure to wait more than one minute may cause accidental air bag deployment and possible personal injury. DISABLING SYSTEM Disconnect and shield negative battery cable. Wait more …

Continue reading ‘2001 Mazda Millenia S Disabling & Activating Air Bag System’ »

2001 Mazda Millenia S Dashboard Removal & Installation

download 1. Disable air bag system. See AIR BAG SYSTEM SAFETY article in GENERAL SERVICING. Obtain anti-theft radio code from owner before servicing vehicle. Disconnect negative battery cable. 2. Using taped flat-blade screwdriver, carefully pry at rear of center panel to release 2 clips. Pull center panel forward to remove 2 more clips and release …

Continue reading ‘2001 Mazda Millenia S Dashboard Removal & Installation’ »

1983 Mazda 626 Timing Belt Removal & Installation

download CAUTION: This application is an interference engine. Do not rotate camshaft or crankshaft when timing belt is removed, or engine damage may occur. TIMING BELT Removal 1. Disconnect negative battery cable. On B2200, drain cooling system. Radiator removal may be required. Remove cooling fan and shroud. Remove distributor from front housing. Remove cooling fan …

Continue reading ‘1983 Mazda 626 Timing Belt Removal & Installation’ »

1997 Mazda Protege SE Keeps Breaking The Alternator Belt

download Customer Concern: Tests/Procedures: Potential Causes: Tech Tips: Keeps breaking the alternator belt. Replaced the alternator, water pump and crankshaft pulley but still has the problem. 1. Test for the alternator overcharging. If the alternator is overcharging, inspect the Engine Control Module (ECM) for signs of something being spilled on it. 2. Try an alternator …

Continue reading ‘1997 Mazda Protege SE Keeps Breaking The Alternator Belt’ »