2001–2004 Toyota Highlander Engine Hood Release Cable Spring Improvement

download To improve operation and feel, the engine hood release cable spring has been improved on 2001– 2004 model year Highlander vehicles. Repair Procedure 1. Remove radiator grille. A. Remove the 4 clips from the top of the radiator grille. B. Release the 2 side clips and remove the radiator grille. 2. Using a screwdriver, …

Continue reading ‘2001–2004 Toyota Highlander Engine Hood Release Cable Spring Improvement’ »

2001-2005 Ford Taurus Camshaft Tick Noise—3.0L 4V Engine Only

download Issue some 2001-2005 taurus/sable, 2001-2006 escape and 2005-2006 mariner vehicles built prior to 1-17-2006 equipped with the 3.0l 4v duratec engine may exhibit a ticking noise from the left bank cylinder head, with the engine at normal operating temperature only. Action to diagnose, with the engine running and warm (normal operation temperature), using a …

Continue reading ‘2001-2005 Ford Taurus Camshaft Tick Noise—3.0L 4V Engine Only’ »

2001-2003 Ford E-150 Mil On With Dtc P1131 And/ Or P1151 – 4.2L Engine

download FORD: This article supersedes TSB 05-17-3 to update the vehicle model years and issue. ISSUE: Some 2001-2003 F-150, 2004 F-150 Heritage and 2001-2003 E-150/250 vehicles equipped with a 4.2L engine may exhibit the malfunction indicator lamp (MIL) on with diagnostic trouble codes (DTCs) P1131 and/or P1151 (system too lean bank 1 or 2). This …

Continue reading ‘2001-2003 Ford E-150 Mil On With Dtc P1131 And/ Or P1151 – 4.2L Engine’ »

2000–2001 Toyota Camry & Solara (5S–Fe) M.I.L. On Dtc P0300

download Introduction Applicable Vehicles Under certain conditions, some 2000 and 2001 model year 5S–FE equipped Camry and Solara vehicles may exhibit a M.I.L. “ON” with DTC P0300 (Random Multiple Cylinder Misfire). These vehicles may also exhibit a hard–to–start, start and stall, or rough idle condition when cold. The Engine Control Module (ECM) logic (SAE term: …

Continue reading ‘2000–2001 Toyota Camry & Solara (5S–Fe) M.I.L. On Dtc P0300’ »

2001 Ford Windstar Remove and Install Intake Manifold

download COWL TOP VENT PANEL 1. Remove windshield wiper pivot arms. Remove cowl top vent panel retaining screws. Release cowl top vent panel retaining clips. Remove windshield wiper fluid hose. Remove cowl top vent panel. 2. To install, reverse removal procedure. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS . INTAKE MANIFOLD Removal 1. …

Continue reading ‘2001 Ford Windstar Remove and Install Intake Manifold’ »