2002-2005 Ford Explorer Gear Selector Lever – Increased Effort To Shift From Drive To Park

download FORD: 2002-2005 Explorer MERCURY: 2002-2005 Mountaineer ISSUE Some 2002-2005 Explorer 4dr/Mountaineer vehicles, may require a greater effort to move the gear selector lever (shift lever) from drive to park. This may be due to a time delay with the brake shift interlock (BSI) pin retraction. ACTION To service, replace the BSI switch. Refer to …

Continue reading ‘2002-2005 Ford Explorer Gear Selector Lever – Increased Effort To Shift From Drive To Park’ »

2002 Ford Explorer 5R55W Transmission No 3Rd Gear Or Slipping 2-3 Shift Dtcs P0733 And P0745

download ISSUE Some 2002 Explorer/Mountaineer vehicles built prior to 3/4/2002 with 5R55W transmission, may exhibit no 3rd gear or slipping 2-3 shift with diagnostic trouble codes (DTCs) P0733 and P0745 present. This may be due to a broken intermediate band. ACTION If the conditions described are verified: • Follow Service Procedure “A” to confirm band …

Continue reading ‘2002 Ford Explorer 5R55W Transmission No 3Rd Gear Or Slipping 2-3 Shift Dtcs P0733 And P0745’ »

1998 Ford F 150/250 Differential Case and Ring Gear Disassembly And Assembly

download Disassembly 1. Remove the differential case (4204); refer to Differential Case in this section. 2. NOTE: The differential bearings (4221) need not be removed to overhaul the Ford limited slip differential. If bearing removal is required, use the 2-Jaw Puller for Differential Case Bearings. NOTE: The anti-lock speed sensor ring cannot be reused once …

Continue reading ‘1998 Ford F 150/250 Differential Case and Ring Gear Disassembly And Assembly’ »

2003 Ford Taurus/ Sable How to Disassembly And Assembly Steering Column — Column Shift

download Disassembly 1. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, notes and instructions in the steering column removal and installation procedure. Remove the steering column. For additional information, refer to Steering Column in this section. 2. Remove the clockspring. For additional information, refer to Section 501-20B. 3. Remove …

Continue reading ‘2003 Ford Taurus/ Sable How to Disassembly And Assembly Steering Column — Column Shift’ »

1996 Ford Windstar How to remove and install Valve Tappet Hydraulic

download NOTE: Before replacing a valve tappet (6500) for noisy operation, make sure the noise is not caused by improper valve-to-rocker arm clearance or by worn rocker arms (6564) or push rods (6565). Removal 1. Disconnect ignition wires at the spark plugs (12405). To avoid damaging ignition wires use Spark Plug Wire Remover T74P-6666-A. Refer …

Continue reading ‘1996 Ford Windstar How to remove and install Valve Tappet Hydraulic’ »