1990 Ford Ranger Timing Belt Removal & Installation

download TIMING BELT Removal 1. Disconnect negative battery cable. Rotate engine clockwise and position cylinder No. 1 on TDC of compression stroke. Ensure “O” mark on crankshaft pulley aligns with “O” mark on outer timing belt cover. 2. Looking through plug hole of outer timing belt cover, ensure camshaft sprocket timing mark aligns with cover …

Continue reading ‘1990 Ford Ranger Timing Belt Removal & Installation’ »

1997 Ford Contour Timing Belt Removal & Installation

download TIMING BELT Removal 1. Noting position for installation reference, disconnect secondary wires from spark plugs. Remove spark plugs. 2. Disconnect negative battery cable. Remove air intake resonators. Remove power steering pressure hose bracket from lifting eye, and position aside. 3. Support engine from above using Three Bar Engine Support (D88L-6000-A) or equivalent. Remove upper …

Continue reading ‘1997 Ford Contour Timing Belt Removal & Installation’ »

2002 Ford Truck Expedition How to Remove and Install Timing Chain

download Removal CAUTION: Since the engine is not free-wheeling, if the crankshaft or the camshafts are moved in any manner during removal and installation the crankshaft and camshafts must be re-synchronized. These steps are located in Engine Assembly Steps 35 to 48. 1. Remove the engine front cover. 2. Remove the crankshaft sensor ring from …

Continue reading ‘2002 Ford Truck Expedition How to Remove and Install Timing Chain’ »

1998 Ford Expedition How to Remove Timing Chains

download Removal 1. Remove valve covers. See VALVE COVERS . Remove front cover. See FRONT COVER . Remove crankshaft position sensor pulse wheel from crankshaft. CAUTION: DO NOT rotate engine with timing chain removed. Damage to valve/piston may result. 2. Rotate crankshaft until No. 1 piston is at TDC. This positions crankshaft keyway 45 degrees …

Continue reading ‘1998 Ford Expedition How to Remove Timing Chains’ »

1993 Ford Taurus How to Remove and install Timing Belt

download Removal Note: This engine is a dual overhead cam motor with a single timing belt sprocket on each bank, the second camshaft is driven by a chain under the valve cover of each cylinder head. For Service and Repair of the chain and tensioner, refer to Camshaft Service and Repair. See: Camshaft\Service and Repair …

Continue reading ‘1993 Ford Taurus How to Remove and install Timing Belt’ »