ford 5r55w band adjustment Direct Download speed 7287 Kb/s

  ford 5r55w band adjustment Full Version speed 5567 Kb/s


2002 Ford Explorer 5R55W Transmission No 3Rd Gear Or Slipping 2-3 Shift Dtcs P0733 And P0745

download ISSUE Some 2002 Explorer/Mountaineer vehicles built prior to 3/4/2002 with 5R55W transmission, may exhibit no 3rd gear or slipping 2-3 shift with diagnostic trouble codes (DTCs) P0733 and P0745 present. This may be due to a broken intermediate band. ACTION If the conditions described are verified: • Follow Service Procedure “A” to confirm band …

Continue reading ‘2002 Ford Explorer 5R55W Transmission No 3Rd Gear Or Slipping 2-3 Shift Dtcs P0733 And P0745’ »

2004 Ford Excursion, F-Super Duty 250-550 Suspension System Camber and Caster Adjustment

download 1. CAUTION: Do not bend axles or radius arms to change alignment. Using an alignment rack and manufacturer’s instructions, measure the caster and camber. • Refer to Alignment Specifications in the Specifications portion of this section for optimal alignment settings. • Note any difference between the actual measurements and the specification. This information will …

Continue reading ‘2004 Ford Excursion, F-Super Duty 250-550 Suspension System Camber and Caster Adjustment’ »

2003 Ford Mustang Hinge Adjustment General Procedures

download Hinge Adjustment NOTE: The door should be adjusted for even and parallel fit with the body opening and surrounding panels as well as making sure that the anti-chuck pin is not binding on convertible models. 1. Remove the A-pillar lower trim panel. 2. Position the electrical connectors aside. 3. Loosen the lower front door …

Continue reading ‘2003 Ford Mustang Hinge Adjustment General Procedures’ »

2007-2008 Ford Edge Pull/ Drift

download Issue some 2007-2008 ford edge and lincoln mkx vehicles may exhibit a drift/pull concern that occurs even though the tire pressures and wheel alignment are within specifications, and the concern is not corrected by rotating the front tires left to right. Action follow the service procedure steps to correct the condition. Service procedure verify …

Continue reading ‘2007-2008 Ford Edge Pull/ Drift’ »

1997 Ford F-250/ 350/ Super Duty Axle Shaft, Hub, Oil Seal and Outer Wheel Bearing Removal And Installation

download Removal NOTE: If, for any reason, the rear hub (1109) is removed from the spindle, the old hub seal must be removed and a new hub seal installed. 1. Set the parking brake and loosen the eight axle shaft retaining bolts. 2. Raise the vehicle to the desired working height, keeping the axle parallel …

Continue reading ‘1997 Ford F-250/ 350/ Super Duty Axle Shaft, Hub, Oil Seal and Outer Wheel Bearing Removal And Installation’ »