1984 Toyota Pickup Pick-Up Coil-To-Signal Rotor (Reluctor) Air Gap Adjustments

download Pick-up coil-to-signal rotor (reluctor) air gap 1. Using a flat, non-magnetic feeler gauge, check air gap between pick-up coil pole piece and each reluctor tooth. Gaps should be equal and within specification. Pick-up coil air gap should be .008-.016″ (0.2-0.4 mm). 2. If not, loosen screws, and adjust pick-up coil air gap to specification. …

Continue reading ‘1984 Toyota Pickup Pick-Up Coil-To-Signal Rotor (Reluctor) Air Gap Adjustments’ »

1993 Chevrolet Astro Van Pickup Coil Testing Removal & Installation

download TESTING 1. With the ignition key OFF , remove the console cover, distributor cap, rotor and disconnect the pickup coil-to-module wire harness. 2. Connect an ohmmeter from the distributor housing to one pickup lead. The reading should be infinite at all times. 3. Connect an ohmmeter to both pickup coil wire terminals. The reading …

Continue reading ‘1993 Chevrolet Astro Van Pickup Coil Testing Removal & Installation’ »

2008-2010 Ford F-450 Pick Up – Steering Wander On Rutted Roads

download Due to stiff commercial tires used on 2008 – 2010 F-450 Pick Up, some customers may perceive a wander feel on rutted/ rough roads. The condition my be worse with traction tires. Tire changes are not recommended. First, compare to the same vehicle (F-450 PU only). The F-450 PU is based on the F-450 …

Continue reading ‘2008-2010 Ford F-450 Pick Up – Steering Wander On Rutted Roads’ »

2003 Hyundai Sonata Has A Code P0350 For An Ignition Coil Control Circuit Malfunction

download Customer Concern: Tests/Procedures: Potential Causes: Has a code P0350 for an ignition coil control circuit malfunction. Engine starts and idles ok but won’t rev up. Seems to have good spark. 1. Scope the trigger signals to the coils on the Orange and White wires, there should be square wave signals. If the trigger signals …

Continue reading ‘2003 Hyundai Sonata Has A Code P0350 For An Ignition Coil Control Circuit Malfunction’ »

2004 BMW 325i Replacing Ignition Coil

download Switch off ignition. Remove cover for ignition coils. Version With Single-Spark Ignition Coils: Unlock connector of ignition coils. Disconnect connector from ignition coils. Unfasten screws on ignition coil. Pull out ignition coil. Installation: Screw down grounding strap (1) to cylinder head cover mounting and to ignition coil for cylinders 1 and 6. On Metal …

Continue reading ‘2004 BMW 325i Replacing Ignition Coil’ »