1996 Ford Taurus Camshaft Position (CMP) sensor removal installation

download CAUTION: Syncro Positioning Tool T95T-12200-A (303-529) must be obtained prior to installation of the replacement synchronizer assembly. Failure to follow this procedure will result in the fuel system being out of time with the engine, possibly causing engine damage. REMOVAL CAUTION: Prior to removal of the Camshaft Position (CMP) sensor, set cylinder No.1 to …

Continue reading ‘1996 Ford Taurus Camshaft Position (CMP) sensor removal installation’ »

1997 Ford F-250/ 350/ Super Duty Axle Shaft, Hub, Oil Seal and Outer Wheel Bearing Removal And Installation

download Removal NOTE: If, for any reason, the rear hub (1109) is removed from the spindle, the old hub seal must be removed and a new hub seal installed. 1. Set the parking brake and loosen the eight axle shaft retaining bolts. 2. Raise the vehicle to the desired working height, keeping the axle parallel …

Continue reading ‘1997 Ford F-250/ 350/ Super Duty Axle Shaft, Hub, Oil Seal and Outer Wheel Bearing Removal And Installation’ »

2004 Ford F150 Rear Axle Differential Cover, Axle Shaft, Oil Seal, and Rear Wheel Bearing Removal And Installation

download 1. With the vehicle in NEUTRAL, position on a hoist. For additional information, refer to Section 100-00. 2. Remove the rear wheel and tire assembly. For additional information, refer to Section 204-00. 3. Remove the parts in the order indicated in the following illustration and table. 4. To install, reverse the removal procedure. 5. …

Continue reading ‘2004 Ford F150 Rear Axle Differential Cover, Axle Shaft, Oil Seal, and Rear Wheel Bearing Removal And Installation’ »

2003 Ford Taurus/ Sable How To Remove and Install Camshaft Synchronizer

download Removal 1. CAUTION: The No. 1 cylinder must be set on top dead center (TDC) of the compression stroke or the synchronizer assembly will not be installed correctly. CAUTION: Do not turn the crankshaft or the camshaft during the removal and installation procedure or the fuel system timing will be out of time with …

Continue reading ‘2003 Ford Taurus/ Sable How To Remove and Install Camshaft Synchronizer’ »

2000 Ford F 150 Axle Shaft Removal Installation

download WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in unexpected inflation or deflation of the …

Continue reading ‘2000 Ford F 150 Axle Shaft Removal Installation’ »