hyundai sonata 2011 bumper removal diagram Direct Download speed 7287 Kb/s

  hyundai sonata 2011 bumper removal diagram Full Version speed 5567 Kb/s


2004 Hyundai Sonata Timing & Counterbalance Shaft Belts Removal & Installation

download CAUTION: This application is an interference engine. Do not rotate camshaft or crankshaft when timing belt is removed, or engine damage may occur. TIMING & COUNTERBALANCE SHAFT BELTS Removal CAUTION: DO NOT rotate engine counterclockwise (as viewed from timing belt end of engine). If reusing timing belt, place reference mark on timing belt to …

Continue reading ‘2004 Hyundai Sonata Timing & Counterbalance Shaft Belts Removal & Installation’ »

2005 Hyundai Sonata GL Front Bumper Replacement

download REMOVAL 1. Remove the head lamp and turn signal lamp mounting bolts(3ea) and disconnect the wire connectors. 2. Remove the bumper cover upper mounting bolts and retainers. 3. Remove the bumper cover lower mounting retainers. 4. Remove the front bumper cover from the front bumper back beam. 5. Remove the front bumper back beam …

Continue reading ‘2005 Hyundai Sonata GL Front Bumper Replacement’ »

1997 Hyundai Sonata Timing Belt Replacement

download Removal 1. Remove all drive belts. Remove crankshaft pulley and water pump pulley. Remove upper and lower timing belt covers, noting bolt lengths and locations. 2. Turn crankshaft clockwise and align timing marks so No. 1 cylinder is at TDC. Timing marks on camshaft sprockets should be aligned at upper surface of cylinder head. …

Continue reading ‘1997 Hyundai Sonata Timing Belt Replacement’ »

2001 Hyundai Tiburon Wheel Bearings Removal

download CAUTION: Use Special Hub Remover/Installer and puller to separate hub from steering knuckle. Bearing damage will result if hub is removed using a hammer. Removal 1. Remove steering knuckle and hub assembly. See STEERING KNUCKLE . Install Hub Remover & Knuckle Arm Bridge Adapter on steering knuckle. See SPECIAL TOOLS table. See Fig. 6 …

Continue reading ‘2001 Hyundai Tiburon Wheel Bearings Removal’ »

2000 Hyundai Elantra GLS Power Steering Line/Hose: Removal And Installation

download While installing the tube and hose assembly, be sure to align white marks on each fitting. Pressure Hose and Tube 1. Remove the air intake hose assembly. 2. Detach the pressure hose mounting clamp. 3. Disconnect the pressure tube fitting at the gear box side. 4. Lift up the vehicle and detach the mounting …

Continue reading ‘2000 Hyundai Elantra GLS Power Steering Line/Hose: Removal And Installation’ »