2002-2004 Nissan Altima Manual Hvac Temperature Control Inoperative

download If you confirm the manual a/c system temperature control will not operate. Actions remove and inspect the a/c control. • if the temperature control cable and/or the a/c control attachment point for the cable are damaged, replace both. If the above are not damaged, and only the temperature control lever is damaged, replace only …

Continue reading ‘2002-2004 Nissan Altima Manual Hvac Temperature Control Inoperative’ »

1996 Nissan Altima GLE Timing Chain Replacement

download CAUTION: If cylinder head is installed and timing chain is disconnected, DO NOT rotate camshaft or crankshaft; valves will contact pistons, resulting in bent valves. NOTE: Procedure includes cylinder head removal; however, it may not be necessary to remove cylinder head. Removal 1. Release fuel pressure. See FUEL PRESSURE RELEASE . Drain coolant from …

Continue reading ‘1996 Nissan Altima GLE Timing Chain Replacement’ »

2000 Nissan Altima SE Timing Belt Replacement

download Removal 1. Release fuel pressure. See FUEL PRESSURE RELEASE. Drain coolant from radiator and cylinder block. Drain engine oil. Disconnect all necessary coolant hoses, electrical connectors, vacuum hoses, fuel lines and control cables. 2. Remove front exhaust pipe. Remove air injection valve pipe. Remove intake air duct. Remove radiator fan and shroud. On Frontier …

Continue reading ‘2000 Nissan Altima SE Timing Belt Replacement’ »

2002-2003 Altima And Sentra Qr25De Engine Exhaust Pipe Hanger Pin And Pre-Catalyst

download Note: for 2003 and 2004 applied vehicles: when you perform procedure c (ecm reprogramming), go to ntb06-051a for reprogramming information. You will still need to perform all other parts of this bulletin on 2003 and 2004 applied vehicles. Introduction nissan has determined that some 2002-2003 model year altima and 2002-2004 model year sentra vehicles …

Continue reading ‘2002-2003 Altima And Sentra Qr25De Engine Exhaust Pipe Hanger Pin And Pre-Catalyst’ »

2003-2005 Nissan Altima 4 Speed Automatic Transmission Harsh 1-2 Shift And/Or Dtc P0745 Stored

download If you confirm: the transmission fluid is full (correct level) and in good condition (not burnt), and there is a harsh shift from 1st to 2nd gear, and/or dtc p0745 (line pressure solenoid circuit) is stored, actions: 1. Drain and remove the transmission oil pan. 2. Push/pull the ground terminal and wire for the …

Continue reading ‘2003-2005 Nissan Altima 4 Speed Automatic Transmission Harsh 1-2 Shift And/Or Dtc P0745 Stored’ »