remove fan clutch from 528i bmw Direct Download speed 7287 Kb/s

  remove fan clutch from 528i bmw Full Version speed 5567 Kb/s


1998 BMW 528i Removing and Installing/ Replacing Fan Clutch

download If necessary, remove air duct. Note: S54 (M cars) Remove engine underguard and release fan cowl. Caution: Left-hand threads. Using special tool 11 5 030, grip pulley and unfasten cap nut from water pump using special tool 11 5 040. If necessary, unfasten fan cowl. Take the fan wheel with fan coupling off the …

Continue reading ‘1998 BMW 528i Removing and Installing/ Replacing Fan Clutch’ »

1998 BMW 528i (E39) Replacing Alternator Drive Belt

download If the drive belt is to be subsequently reused: Mark direction of travel and reinstall drive belt in same direction of travel. Remove fan clutch with fan impeller. If necessary, remove A/C compressor drive belt. Remove cap from tensioning roller. Relieve tension on belt drive. Remove drive belt. Caution: Drive belt must be replaced …

Continue reading ‘1998 BMW 528i (E39) Replacing Alternator Drive Belt’ »

2005 Acura RL A/C Compressor Clutch Overhaul

download A/C clutch holder, Robinair 10204 or Kent-Moore J37872, or Honda Tool and Equipment KMT-J33939, commercially available 1. Remove the center bolt while holding the pressure plate (A) with a commercially available A/C clutch holder (B). 2. Remove the pressure plate (A) and shim(s) (B), taking care not to lose the shim(s). If the clutch …

Continue reading ‘2005 Acura RL A/C Compressor Clutch Overhaul’ »

1990 BMW 525I Clutch Assembly Removal & Installation

download REMOVAL & INSTALLATION 1. Disconnect the negative battery cable. Raise and safely support the vehicle. Remove the heat shield and then the mounting bolts. Disconnect the speed and reference mark sensors at the flywheel housing. Mark the plugs for reinstallation. 2. Remove the transmission. 3. If equipped with a 265/6 transmission (without an integral …

Continue reading ‘1990 BMW 525I Clutch Assembly Removal & Installation’ »

2005 Honda Odyssey A/C Compressor Clutch Overhaul

download Special Tools Required A/C clutch holder, Robinair 10204 or Kent-Moore J37872, or Honda Tool and Equipment KMT-J33939, commercially available 1. Remove the center bolt (A) while holding the pressure plate with a commercially available A/C clutch holder (B). 2. Remove the pressure plate (A) and shim(s) (B), taking care not to lose the shim(s). …

Continue reading ‘2005 Honda Odyssey A/C Compressor Clutch Overhaul’ »