2005 Hyundai XG350 Intake Manifold Replacement

download REMOVAL 1. Remove the air intake hose connected to the throttle body. 2. Remove the engine coolant hose and throttle body. 3. Remove the P.C.V. hose and brake booster vacuum hoses. 4. Disconnect the vacuum hose connections. 5. Remove the surge tank stay. 6. Remove the surge tank. 7. Remove the surge tank and …

Continue reading ‘2005 Hyundai XG350 Intake Manifold Replacement’ »

2004 Honda Element DX Intake Manifold And Exhaust System Replacement

download REMOVAL 1. Disconnect the intake air temperature (IAT) sensor connector (A). 2. Remove the vacuum hose (B) and breather pipe (C), then remove the intake air duct (D). 3. Remove the intake manifold cover. Remove the throttle cable (A) and cruise control actuator cable (B) by loosening the locknuts (C), then slipping the cable …

Continue reading ‘2004 Honda Element DX Intake Manifold And Exhaust System Replacement’ »

2003 Toyota Corolla & Matrix Floor Shift Cable Transmission Control Shift (Atm) Replacement

download Precaution (see page 60–1) separate battery negative terminal remove instrument cluster finish panel sub–assy center (see page 71–10) remove instrument cluster finish panel assy ctr (see page 71–10) remove instrument panel box (see page 71–10) remove instrument panel finish panel lower center (see page 71–10) remove air bag sensor assy center (see page 60–39) …

Continue reading ‘2003 Toyota Corolla & Matrix Floor Shift Cable Transmission Control Shift (Atm) Replacement’ »

2003 Acura 3.2CL Headlight Replacement

download 1. Remove the front bumper. 2. Disconnect the connectors (A) from the headlight (B). 3. Remove the five mounting bolts, then remove the corner upper beam (C) and headlight assembly. 4. Install in the reverse order of removal. 5. After replacement, adjust the headlights to local requirements. 1. Make sure you have the anti-theft …

Continue reading ‘2003 Acura 3.2CL Headlight Replacement’ »

Toyota Replacement Procedure Of Automatic Antenna Mast

download When the antenna mast is broken or damaged on a 1990 Celica, Cressida or V6 Truck/4Runner equipped with a power antenna, the following procedure should be used to replace the antenna mast. Please note that the following procedure requires two people. REPLACEMENT INSTRUCTIONS: 1) Turn the Ignition Key to the “OFF” position. 2) Carefully …

Continue reading ‘Toyota Replacement Procedure Of Automatic Antenna Mast’ »