2007 Toyota Camry How To Remove And Install Rear Bumper

download
Removal 1. Remove rear bumper assembly (w/o rear lower spoiler) a. Put protective tape around the rear bumper assembly. B. Using a screwdriver, open the 2 rear bumper plates. Hint: tape the screwdriver tip before use. C. Remove the 6 screws and 2 clips. D. Disengage the 12 claws and disconnect the rear bumper assembly as shown in the illustration. Hint: use the same procedures for the rh side and lh side. E. Remove the rear bumper assembly. 2. Remove rear floor board (w/ rear lower spoiler)

a. Remove the 4 screws, 2 clips, 3 nuts and rear floor board. 3. Remove rear bumper assembly (w/rear lower spoiler) a. Put protective tape around the rear bumper assembly. B. Using a screwdriver, open the 2 rear bumper plates. Hint: tape the screwdriver tip before use. C. Remove the 6 screws. D. Disengage the 12 claws and disconnect the rear bumper assembly as shown in the illustration. Hint: use the same procedures for the rh side and lh side. E. Remove the rear bumper assembly. Installation 1. Install rear bumper assembly (w/o rear lower spoiler) b. Install the rear bumper assembly with the 6 screws and 2 clips. C. Install the 2 rear bumper plates. 2. Install rear bumper assembly (w/ rear lower spoiler) a. Engage each claw. B. Install the rear bumper assembly with the 6 screws. C. Install the 2 rear bumper plates. 3. Install rear floor board (w/ rear lower spoiler) a. Install the rear floor board with the 3 nuts, 2 clips and 4 screws.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>